Utility

Steve's Software

Steve Nutting

Source files for use with SC_ASSEMBLER

These source files are for most of my SC_SOFTWARE collection as they were mainly written in machine code, not all the source maybe up to date or complete but at least you can see some of my work close up.

There is loads more some got corrupted on my Sam discs and others were specialised and were not released.

This will keep you occupied for several hours!

Note best to download SC_ASSEMBLER 512K working copy, boot up and run.

Use Simcoupe FILE and OPEN to insert one of the source discs so you can load them in.

On SC_ASSEMBLER type in +c and press ENTER to do a directory of the disc, and +l and press ENTER to load them in.

Steve's Software

Steve Nutting

SC_HD LOADER
Loader embedded within MasterDos to load code files from S.D.Softwares hard drive Dos

SCASSEMBLER April 1990
SCSPECLONE September 1990
SCAUTOBOOT 1990

SCFILER January 1991
SCCOMPRESSOR 1 April 1991
SCCOMPRESSOR 2 November 1991
SCDISC PROTECOR 1991?

SCDISC CLONE March 1992
SCPD3 March 1992
SCMONITOR April 1992

SCDTP March 1993
SC24 PIN DUMPER August 1993

SCWORD pro April 1994

SCCLIPART November 1995

SC_HD LOADER June 1996

All instructions for installing, manual, adverts, and my personal notes
are in the pdf file included in the large image file.

Assemble source for most of my products and a way to verify I have given full permission
can be found separately with “SC_Assembler source files” image file on this site.

STEVES SOFTWARE

S.J.NUTTING

SC_24 PIN DUMPER

SCASSEMBLER April 1990
SCSPECLONE September 1990
SCAUTOBOOT 1990

SCFILER January 1991
SCCOMPRESSOR 1 April 1991
SCCOMPRESSOR 2 November 1991
SCDISC PROTECOR 1991?

SCDISC CLONE March 1992
SCPD3 March 1992
SCMONITOR April 1992

SCDTP March 1993
SC24 PIN DUMPER August 1993

SCWORD pro April 1994

SCCLIPART November 1995

SC_HD LOADER June 1996

All instructions for installing, manual, adverts, and my personal notes
are in the pdf file included in the large image file.

Assemble source for most of my products and a way to verify I have given full permission
can be found separately with “SC_Assembler source files” image file on this site.

STEVES SOFTWARE

S.J.NUTTING

SC_DTP

SCASSEMBLER April 1990
SCSPECLONE September 1990
SCAUTOBOOT 1990

SCFILER January 1991
SCCOMPRESSOR 1 April 1991
SCCOMPRESSOR 2 November 1991
SCDISC PROTECOR 1991?

SCDISC CLONE March 1992
SCPD3 March 1992
SCMONITOR April 1992

SCDTP March 1993
SC24 PIN DUMPER August 1993

SCWORD pro April 1994

SCCLIPART November 1995

SC_HD LOADER June 1996

All instructions for installing, manual, adverts, and my personal notes
are in the pdf file included in the large image file.

Assemble source for most of my products and a way to verify I have given full permission
can be found separately with “SC_Assembler source files” image file on this site.

STEVES SOFTWARE

S.J.NUTTING

SC_MONITOR

SCASSEMBLER April 1990
SCSPECLONE September 1990
SCAUTOBOOT 1990

SCFILER January 1991
SCCOMPRESSOR 1 April 1991
SCCOMPRESSOR 2 November 1991
SCDISC PROTECOR 1991?

SCDISC CLONE March 1992
SCPD3 March 1992
SCMONITOR April 1992

SCDTP March 1993
SC24 PIN DUMPER August 1993

SCWORD pro April 1994

SCCLIPART November 1995

SC_HD LOADER June 1996

All instructions for installing, manual, adverts, and my personal notes
are in the pdf file included in the large image file.

Assemble source for most of my products and a way to verify I have given full permission
can be found separately with “SC_Assembler source files” image file on this site.

STEVES SOFTWARE

S.J.NUTTING

SC_PD3 Contains public domain of:-
SC_COMPRESSor 1 & 2
SC_DISC CLONE
SC_SPECLONE
Humphrey- Disc map utility.

SCASSEMBLER April 1990
SCSPECLONE September 1990
SCAUTOBOOT 1990

SCFILER January 1991
SCCOMPRESSOR 1 April 1991
SCCOMPRESSOR 2 November 1991
SCDISC PROTECOR 1991?

SCDISC CLONE March 1992
SCPD3 March 1992
SCMONITOR April 1992

SCDTP March 1993
SC24 PIN DUMPER August 1993

SCWORD pro April 1994

SCCLIPART November 1995

SC_HD LOADER June 1996

All instructions for installing, manual, adverts, and my personal notes
are in the pdf file included in the large image file.

Assemble source for most of my products and a way to verify I have given full permission
can be found separately with “SC_Assembler source files” image file on this site.

STEVES SOFTWARE

S.J.NUTTING

SC_FILER

SCASSEMBLER April 1990
SCSPECLONE September 1990
SCAUTOBOOT 1990

SCFILER January 1991
SCCOMPRESSOR 1 April 1991
SCCOMPRESSOR 2 November 1991
SCDISC PROTECOR 1991?

SCDISC CLONE March 1992
SCPD3 March 1992
SCMONITOR April 1992

SCDTP March 1993
SC24 PIN DUMPER August 1993

SCWORD pro April 1994

SCCLIPART November 1995

SC_HD LOADER June 1996

All instructions for installing, manual, adverts, and my personal notes
are in the pdf file included in the large image file.

Assemble source for most of my products and a way to verify I have given full permission
can be found separately with “SC_Assembler source files” image file on this site.

STEVES SOFTWARE

S.J.NUTTING

SC_SPECLONE Spectrum emulator with full Spectrum key scan on Sam, Jump in and out of Spectrum and Sam to use discs etc and Plus D Snapshot loading.

SCASSEMBLER April 1990
SCSPECLONE September 1990
SCAUTOBOOT 1990

SCFILER January 1991
SCCOMPRESSOR 1 April 1991
SCCOMPRESSOR 2 November 1991
SCDISC PROTECOR 1991?

SCDISC CLONE March 1992
SCPD3 March 1992
SCMONITOR April 1992

SCDTP March 1993
SC24 PIN DUMPER August 1993

SCWORD pro April 1994

SCCLIPART November 1995

SC_HD LOADER June 1996

All instructions for installing, manual, adverts, and my personal notes
are in the pdf file included in the large image file.

Assemble source for most of my products and a way to verify I have given full permission
can be found separately with “SC_Assembler source files” image file on this site.

Steve's Software

Steve Nutting

SC_ASSEMBLER

All instructions for installing, manual, adverts, and my personal notes are in the pdf file included in this large image file.

Assembler source for most of my products and a way to verify I have given full permission can be found separately with SCAssembler source files for most SCSoftware image file on this site.

PDF manual scan at http://www.samcoupe-pro-dos.co.uk

Public Domain

Johan Koelman

An alteration to the SAM81 emulator to make it compatible with pseudo-hires and hires games.

This is the first version of SAM2_ZX81 for hires and pseudo-hires ZX81 programs by Johan Koelman.

After booting (F9) the emulator it came up waiting for a key press. Once done, you are in the ZX81 mode. To load a program simply type in:

LOAD “1” (if you are on Sim Coupe or on floppy disk with a real SAM) or

LOAD “2” (if you will load from SAMs harddisk)

A menu will be displayed, showing you all the programs to load.

Note: When a program is loaded, it will not autostart.
When you see 0/0 in the upper part of screen, simply type RUN and voila, you see a HiRes Zeddy game emulated on a SAM. Except “Micmouse”, type in GOTO 5 to start.

Even it is the alpha version, Johan has build in some extra keysettings:

F1 - shows you a help screen:
Press F1 again to return to the main program.

Press when help screen is shown:

F2 - for more or less screen refreshs
F3 - for more or less counted clock interrupts

These options can be very helpful on pseudo and hires games. The changes are not shown, this might be added later!

To exit a program pess TAB and ESCAPE together.

Programs included:

• Rocket
  
• Madjump II
  
• Flater en Flaters (Guus-Fla)
  
• Micromouse goes debugging
  
• Starfight

The ‘SAM2_ZX81’ can also load normal ZX81 programs, as I have tested several times.